Category: 20196-21-8

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.20196-21-8,Thiomorpholin-3-one,as a common compound, the synthetic route is as follows.,20196-21-8

Preparation 6 4-Benzylthiomorpholin-3-one Under a nitrogen atmosphere in a flame-dried flask, sodium hydride (4.65 g, 0.1 05 mol, 54% oil dispersion) was added to 150 mL of anhydrous dimethylformamide (DMF), and the suspension was cooled to 0 C. Thiomorpholin-3-one (11.7 g, 0.1 mol) was added in portions over 30 minutes with stirring. After gas evolution had stopped (ca. 30 minutes), benzyl chloride (12.1 g, 0.105 mol) in DMF (50 mL) was added and stirring was continued at room temperature overnight. The reaction was then warmed to 80 C. for 15 minutes and cooled. Water (250 mL) was added and the mixture was extracted with chloroform which was dried (MgSO4) and concentrated in vacuo to an oil. The oil was triturated with ethyl ether (Et2O) and cooled by dry ice to give the product, 12.75 g as a solid, m.p. 60-62 C. Recrystallization of 5 g from 100 mL of Et2O gave 3.5 g of pure product, m.p. 62-63 C. along with a second crop of 0.75 g with m.p. 62-63 C.

As the paragraph descriping shows that 20196-21-8 is playing an increasingly important role.

Reference£º
Patent; Gibbs, Megan Ann; Howard, Harry Ralph; Sprouse, Jeffrey Scott; Schachter, Joel Barry; Chappell, Phillip Branch; US2002/49214; (2002); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Thiomorpholin-3-one, cas is 20196-21-8, it is a common heterocyclic compound, the Thiomorpholine compound, its synthesis route is as follows.,20196-21-8

Preparation 4 4-(3,4-Dichlorophenyl)-thiomorpholin-3-one Under a nitrogen atmosphere in a flame-dried flask, sodium hydride (72 mg, 1.79 mmol, 60% oil dispersion) was washed with hexanes and then treated with 6 mL of anhydrous DMF, and cooled to 0 C. Thiomorpholin-3-one (200 mg, 1.71 mmol) was added in one portion with stirring. After gas evolution had stopped (ca. 30 min), 4-iodo-1,2-dichlorobenzene (700 mg, 2.56 mmol) was added, followed after 5 minutes by copper (I) bromide (490 mg, 3.42 mmol). After heating at 75 C. overnight, the mixture was partitioned between ethyl acetate and 1N lithium chloride, filtered through diatomaceous earth and combined with additional ethyl acetate washes of the diatomaceous earth filter cake. The organic layers were washed with additional 1N lithium chloride, brine (saturated sodium chloride) and dried over calcium sulfate (CaSO4). Concentration in vacuo gave 363 mg of light brown oil which was flash chromatographed (30-50% ethyl acetate in hexanes) to give a white solid, 108 mg. 1H-NMR (CDCl3, 400 MHz) d 7.44 (1H, d), 7.37 (1H, s), 7.12 (1H, dd), 3.93 (2H, t), 3.43 (2H, s), 3.01 (2H, t).

With the rapid development of chemical substances, we look forward to future research findings about Thiomorpholin-3-one

Reference£º
Patent; Gibbs, Megan Ann; Howard, Harry Ralph; Sprouse, Jeffrey Scott; Schachter, Joel Barry; Chappell, Phillip Branch; US2002/49214; (2002); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.20196-21-8,Thiomorpholin-3-one,as a common compound, the synthetic route is as follows.,20196-21-8

Preparation 4 4-(3,4-Dichlorophenyl)-thiomorpholin-3-one Under a nitrogen atmosphere in a flame-dried flask, sodium hydride (72 mg, 1.79 mmol, 60% oil dispersion) was washed with hexanes and then treated with 6 mL of anhydrous DMF, and cooled to 0 C. Thiomorpholin-3-one (200 mg, 1.71 mmol) was added in one portion with stirring. After gas evolution had stopped (ca. 30 min), 4-iodo-1,2-dichlorobenzene (700 mg, 2.56 mmol) was added, followed after 5 minutes by copper (I) bromide (490 mg, 3.42 mmol). After heating at 75 C. overnight, the mixture was partitioned between ethyl acetate and 1N lithium chloride, filtered through diatomaceous earth and combined with additional ethyl acetate washes of the diatomaceous earth filter cake. The organic layers were washed with additional 1N lithium chloride, brine (saturated sodium chloride) and dried over calcium sulfate (CaSO4). Concentration in vacuo gave 363 mg of light brown oil which was flash chromatographed (30-50% ethyl acetate in hexanes) to give a white solid, 108 mg. 1H-NMR (CDCl3, 400 MHz) d 7.44 (1H, d), 7.37 (1H, s), 7.12 (1H, dd), 3.93 (2H, t), 3.43 (2H, s), 3.01 (2H, t).

The synthetic route of 20196-21-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Gibbs, Megan Ann; Howard, Harry Ralph; Sprouse, Jeffrey Scott; Schachter, Joel Barry; Chappell, Phillip Branch; US2002/49214; (2002); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

20196-21-8, Thiomorpholin-3-one is a Thiomorpholine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,20196-21-8

Preparation 6 4-Benzylthiomorpholin-3-one Under a nitrogen atmosphere in a flame-dried flask, sodium hydride (4.65 g, 0.105 mol, 54% oil dispersion) was added to 150 mL of anhydrous dimethylformamide (DMF), and the suspension was cooled to 0 C. Thiomorpholin-3-one (11.7 g, 0.1 mol) was added in portions over 30 minutes with stirring. After gas evolution had stopped (ca. 30 minutes), benzyl chloride (12.1 g, 0.105 mol) in DMF (50 mL) was added and stirring was continued at room temperature overnight. The reaction was then warmed to 80 C. for 15 minutes and cooled. Water (250 mL) was added and the mixture was extracted with chloroform which was dried (MgSO4) and concentrated in vacuo to an oil. The oil was triturated with ethyl ether (Et2O) and cooled by dry ice to give the product, 12.75 g as a solid, m.p. 60-42 C. Recrystallization of 5 g from 100 mL of Et2O gave 3.5 g of pure product, m.p. 62-43 C. along with a second crop of 0.75 g with m.p. 62-43 C.

The synthetic route of 20196-21-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Pfizer INC; US6423708; (2002); B1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Thiomorpholin-3-one, cas is 20196-21-8, it is a common heterocyclic compound, the Thiomorpholine compound, its synthesis route is as follows.

Preparation 6 4-Benzylthiomorpholin-3-one Under a nitrogen atmosphere in a flame-dried flask, sodium hydride (4.65 g, 0.105 mol, 54% oil dispersion) was added to 150 mL of anhydrous dimethylformamide (DMF), and the suspension was cooled to 0 C. Thiomorpholin-3-one (11.7 g, 0.1 mol) was added in portions over 30 minutes with stirring. After gas evolution had stopped (ca. 30 minutes), benzyl chloride (12.1 g, 0.105 mol) in DMF (50 mL) was added and stirring was continued at room temperature overnight. The reaction was then warmed to 80 C. for 15 minutes and cooled. Water (250 mL) was added and the mixture was extracted with chloroform which was dried (MgSO4) and concentrated in vacuo to an oil. The oil was triturated with ethyl ether (Et2O) and cooled by dry ice to give the product, 12.75 g as a solid, m.p. 60-42 C. Recrystallization of 5 g from 100 mL of Et2O gave 3.5 g of pure product, m.p. 62-43 C. along with a second crop of 0.75 g with m.p. 62-43 C., 20196-21-8

As the rapid development of chemical substances, we look forward to future research findings about 20196-21-8

Reference£º
Patent; Pfizer INC; US6423708; (2002); B1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

20196-21-8, Thiomorpholin-3-one is a Thiomorpholine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(15) A mixture of 5-chloro-N-((1-(4-iodophenyl)-1H-imidazol-4-yl)methyl)thiophene-2-carboxamide 1-6 prepared in Example 1 (230 mg, 0.518 mmol), 3-thiomorpholinone (121 mg, 1.03 mmol), 1,2-trans-diaminocyclohexane (26 muL, 0.21 mmol) and K3PO4 (220 mg, 1.04 mmol) in dioxane (2 mL) was degassed with Ar before being charged with CuI (40 mg, 0.21 mmol). The mixture in a sealed tube was heated at 110 C. overnight. It was then purified by HPLC to give the title compound (58 mg). MS 433.1 and 435.0 (M+H, Cl pattern)., 20196-21-8

As the paragraph descriping shows that 20196-21-8 is playing an increasingly important role.

Reference£º
Patent; Millennium Pharmaceuticals, Inc.; US2007/259924; (2007); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem